FAQ

Every panel is molded from solid polypropylene (PP), the same UV-stabilized polymer used in premium outdoor furniture. Each product line then gets a surface finish — iron-look embossing for Leaf & Bird and Fleur-De-Lis, wood-grain texture for TimberLine, clean geometry for SemiArc.

It feels substantial in your hand but weighs a fraction of metal or stone.

Push the integrated spikes into the ground by hand or with a standard rubber mallet. No digging, no concrete, no tools required.

Lay the panels end to end, lock them via the built-in connectors, and adjust the line as you go. A single person can install a 20-foot run in under 30 minutes.

Yes. The polypropylene is UV-stable, freeze-thaw safe down to USDA zone 3 (-40°F), and completely rust-proof. Salt air near the coast won't affect it.

It stays flexible enough to absorb ground movement in freeze cycles and won't become brittle in direct sun.

Yes. Lightly sand the surface with 220-grit paper, wipe clean, and apply spray paint formulated for plastic (Rust-Oleum Universal or Krylon Fusion).

No primer needed. Two light coats will bond permanently.

Measure the total perimeter of the garden bed in feet. Round up. Each kit by product:

Leaf & Bird — 10 ft (8 panels) or 20 ft (16 panels)
SemiArc — 20 ft (15 panels) or 40 ft (30 panels)
Fleur-De-Lis — 20 ft (15 panels) or 35 ft (27 panels)
TimberLine — 10 ft (8 panels) or 20 ft (16 panels)

Buy two smaller kits if your perimeter falls between sizes — they connect seamlessly.

For standard garden beds, just tamp down any loose soil and push the spikes in. If the ground is compacted, loosen it with a hand trowel along the line first.

For hardpan or rocky soil, pre-drill a pilot hole with a 1/4-inch drill bit or rebar — the spike will slide right in.

Free standard shipping on all US orders over $75. Delivery takes 3-7 business days from our California warehouse.

Orders under $75 ship for a flat $8.95.

You can return unused panels within 30 days of delivery. Free return shipping is included.

Panels must be in original packaging without spike or connector damage. We process refunds within 5 business days of receiving the return.

2-year residential warranty covering defects, color fading, and breakage under normal garden use. Non-standard installations (rocky terrain, vehicle-contact areas) get 1-year coverage.

Just send us a photo — we'll ship replacements at no cost.

10+ years in normal residential use. The polymer doesn't rot, rust, or biodegrade. Over decades, UV exposure causes a slight surface softening — the panels become more pliable, not weaker.

The iron-look and wood-look finishes are molded into the material, not painted on. They won't peel or flake.